Machine Tools 24-7

Phone 352-799-8398 - Fax 352-799-0315

Email: Click Here to Request Quote

At Machine Tools 24-7 we never stop working to serve your machine tool needs

Below are the specs we have on file for this machine. Please contact Machine Tools 24-7 if you have any questions.

Click Machine Title Below to View Photos
DMG Mori-NLX-2500 SY - 700_ID-16156

Machine IDYearManufacturerModelControl
161562015DMG MoriNLX-2500 SY - 700DMG Mori Celos

 DescriptionSpec Values
Capacity:Swing / Swing Over Cross Slide36.37" / 29.72"
 Maximum Turning Diameter / Maximum Turning Length14.4" / 27.75"
 Distance Between Centers34.2"
Main Spindle:Spindle Speeds Minimum - Maximum40 - 4,000 RPM
 Spindle Bore / Bar Capacity / Nose3.58" / 3.1" / A2-8
 Main Motor (30 min / continuous)25 / 22 HP
Sub-Spindle:Speeds60 - 6,000 RPM
 Spindle Bore / Bar Cap / Spindle Nose / Indexing2.8" / 2.1" / A2-5
 Motor (30 min. / cont.)15 / 10 HP
Turret:Number of Positions12 Stations
Travels:X-Axis Travel10.24"
 Z-Axis Travel31.3"
 Y-Axis Travel2" +/-
 B-Axis Travel (sub-spindle)28.90"
 C-Indexing360,000°
Rotary Tools:Rotary Tool Speed6,000 RPM
 Rotary Tool Motor (30 min. / continuous)15 / 10 HP
Rapids:Rapid Traverse (X & Z )1,181 IPM
 Feed Rate (X & Z )0.04 - 787 IPM
Dimensions:Floor Space (L x W x H)156" x 84" x 87"
 Weight (approx)13,000 Lbs
Capacity:Swing / Swing Over Cross Slide36.37" / 29.72"
 Maximum Turning Diameter / Maximum Turning Length14.4" / 27.75"
 Distance Between Centers34.2"
Main Spindle:Spindle Speeds Minimum - Maximum40 - 4,000 RPM
 Spindle Bore / Bar Capacity / Nose3.58" / 3.1" / A2-8
 Main Motor (30 min / continuous)25 / 22 HP
Sub-Spindle:Speeds60 - 6,000 RPM
 Spindle Bore / Bar Cap / Spindle Nose / Indexing2.8" / 2.1" / A2-5
 Motor (30 min. / cont.)15 / 10 HP
Turret:Number of Positions12 Stations
Travels:X-Axis Travel10.24"
 Z-Axis Travel31.3"
 Y-Axis Travel2" +/-
 B-Axis Travel (sub-spindle)28.90"
 C-Indexing360,000°
Rotary Tools:Rotary Tool Speed6,000 RPM
 Rotary Tool Motor (30 min. / continuous)15 / 10 HP
Rapids:Rapid Traverse (X & Z )1,181 IPM
 Feed Rate (X & Z )0.04 - 787 IPM
Dimensions:Floor Space (L x W x H)156" x 84" x 87"
 Weight (approx)13,000 Lbs

 Equipped With
Additional Info.:10" 3-Jaw Hydraulic Chuck Main, 6" 3-Jaw Hydraulic Chuck Sub
 Parts Catcher
 Chip Conveyor
 Tool Presetter - Both Spindles
 Bar Feed Interface
 PCMCIA Interface
 MAPPS IV
Note:Very Low Hours
Additional Info.:10" 3-Jaw Hydraulic Chuck Main, 6" 3-Jaw Hydraulic Chuck Sub
 Parts Catcher
 Chip Conveyor
 Tool Presetter - Both Spindles
 Bar Feed Interface
 PCMCIA Interface
 MAPPS IV
Note:Very Low Hours

Contact Us For All Your Machine Tool Needs.  We, Buy, Sell and Trade All Types of Machine Tools.

Let Us Know If You Have Any Machines For Sale

Copyright 2016 - Machine Tools 24/7